Further Information

This comprehensively restored Aston Martin V8 Evolution 6.0 is for sale, with a V8 6000cc electronic fuel injection engine this masterpiece produces circa 400bhp, reaches 0-60mph in approximately 5.5secs and has a top speed of 160mph+. 


Finished in Cumberland Grey exterior and a Black Leather interior, this V8 Evolution 6.0 is a stunning example of craftsmanship at its best. This V8 has only 952 miles on the clock due to limited use and test mileage from restoration. 
To reinforce the time and effort that has gone into this creation, we have included the restoration timeline that went into transforming this beautiful Aston Martin. 


V8 Total Refurbishment Ref: 6922 :: Photo Gallery (astonrestorations.com)


Showcasing the Aston Workshop’s ‘V8 Evolution 6.0’ package of upgrades. Workshop Manager, Neil Calvert explains the project, ‘Think of it as an evolved V8 developed from years of experience rebuilding and upgrading Astons with the latest hardware. You could make it more extreme, but this would be our ultimate road specification.’ 


Restoration Project


The project began when a long-standing customer asked for his V8 to be ‘sexed up’. His left-hand-drive car had first been delivered to Japan (hence the ‘J’ prefix to the chassis number) before more recently residing at the present (British) owner’s Florida residence. It was in good nick when Aston Workshop performed an initial inspection. ‘The problem with these cars is they usually rot anywhere that the alloy and steel meets,’ explains senior technician Keith Slater. ‘It can become so bad that you put them on a four-post lift and the doors won’t open, but this car was solid.’ 


Nonetheless, suspension, engine, and interior were removed, with the bodyshell taken down to bare metal from its original Tankard Grey and the outer sills and harness carriers replaced. A respray in Cumberland Grey with an extra helping of metal flake followed; it’s why it glints with a discreet bronze sparkle in the sunlight. Subtly tinted glass, later-model 15in BBS alloys wearing slightly wider 225/70 section tyres, and a deeper chin spoiler from the Vantage finish off the discreet exterior alterations. The original interior was also in good shape before work began, requiring only a dashboard retrim – it’s testament to the craftsmanship that it sits so seamlessly with the existing trim. 

The result is a V8 that looks more purposeful than the standard model – in a way you can’t initially quite pin down – without actually appearing modified. 


Lift the front-hinged bonnet and you might also take the V8 for a particularly well-presented original-spec motor. Actually, it’s substantially reworked and accounts for the most obvious transformation in this car’s character. Upgraded to a 6.0-litre capacity, it retains the original crankshaft and stroke, but benefits from new pistons and an increased bore. The original quad carburettor set-up makes way for electronic fuel injection and individual Jenvey throttle bodies, but because everything is so neatly hidden beneath the vast original airbox, you could mistake it for a carburettor installation at a glance. The cylinder head is ported and polished, with the manifolds matched to the inlet tracts, and power is quoted at 430bhp, up from around 300bhp in the standard car. There’s also a new radiator with electronic fan control, and you might spot the air-con upgrade, too. 


The original three-speed auto transmission has been swapped for the Tremec T56 six-speed manual gearbox from the DB7, which combines with a custom propshaft and the original de Dion rear axle. ‘We removed the rear axle and fully refurbished it with new bearings and mountings,’ explains Neil Calvert. ‘The diff cradle is a common weak-spot, so it’s been strengthened to deal with the extra power.’ 

Chassis and brake upgrades top off the package, with Spax coilovers and a thicker front anti-roll bar up front, while the factory lever-arm dampers have been replaced with telescopic Spax units at the rear. Aston Workshop’s brake upgrade introduces six-piston billet aluminium calipers and grooved discs that not only improve stopping power but are said to reduce unsprung weight. 


I jump in the original car first for context. The seats are relatively low-set with a satisfyingly deep squish to the nicely patinated cushions, there’s a thin-rimmed three-spoke leather steering wheel, and a broad transmission tunnel that offsets the pedals on this right-hand-drive model to the right. The cabin feels very much designed for the US market, with a spacious, wide feel across the cabin – it’s a stretch to touch the passenger-side door card from the driver’s seat, even if you’re tall, and you almost expect a bench seat and column shifter. 


There’s an equally loungey feel to the drive. The auto transmission and power-assisted steering make light work of moving such a big, heavy car at low speeds, and the suspension has a soft, gentle lope. This relaxed, damped-down feel extends to the engine, which offers acceptable performance for the era, but serves it up in a rather monotone, muted manner, as though someone’s stuffed a pillow over its intake – you’d guess closer to 200bhp than the 300bhp or so quoted. Energy is partly sapped by the torque convertor and age no doubt, but also because this V8 had to contend with stricter US emissions regulations. By now, Aston had also swapped the mechanical fuel injection of earlier cars for Weber carbs, possibly because it was a more reliable system.


It’s easy to imagine wealthy owners cruising along freeways with one hand on the wheel, but as we weave along fast empty roads over the North York Moors, the sense is of steering that has only a gentle influence over the car’s trajectory, and a body that floats on the straights and rolls before taking a second to settle during cornering, with the front and rear ends dancing off in slightly different directions. The brakes top off the slushy feel with a soft pedal and distinctly leisurely stopping power. 

It’s worth noting that this original car’s suspension and steering would no doubt benefit from a refresh, helping address some of the slop and slack, but there’s clearly scope to make not only a more focused driver’s car but a more confidence-inspiring one, too. 


That’s exactly what Aston Workshop has created with the V8 Evolution 6.0, and it’s the engine that initially grabs your attention. Turn the key and the V8 instantly bristles with extra energy – the body rocks when you blip the throttle, and there’s a likeably thunderous, angry if not OTT soundtrack, even with the standard twin exhausts. 

The V8’s new-found attitude translates to the road, with a surplus of performance and much perkier throttle response courtesy of the Jenvey throttle bodies and the more closely spaced six gear ratios. Acceleration is far more urgent and makes this ‘classic’ V8 not just quick with a few caveats, but genuinely rapid full stop. 

The power delivery feels radically different, too, with rising drama as sound and speed and revs rush to a thrilling, fizzy peak. It’s the V8 liberated from its period shackles, with far greater performance and a richer, more multi-dimensional personality than the standard car. 


Such a crowd-pleaser is the uprated engine that it’s easy to initially overlook some of the subtler upgrades, but they all contribute to a nicely integrated package. 

The new clutch pedal has a long travel, but its progressive biting point means stalling is an unlikely embarrassment, and the manual gear- shift looks very much at home – it’s a bolt-in kit that requires no modification to the Aston’s structure, just a new gear lever surround panel for a factory look inside. The shift action itself is quite a physical thing to hulk from first to reverse (which is right across to the right of fifth gear) and the 1st/2nd and 3rd/4th planes are close together, which takes acclimatisation and a certain delicacy. Get up and running, though, and the shifts are pleasingly short and direct and do introduce a layer of interaction that’s sorely absent from the three-speed automatic. 

Power-assisted steering again makes this an easy car to manoeuvre, but at speed, it quickly communicates how much tighter this V8’s chassis is, with slop dialled out, a shade more weight added in, and a more precise connection to the front tyres. Partly that’s because everything has been refreshed, yes, but firmer spring rates and slightly wider tyres will also contribute to the more meaningful steering definition. 

Even before reaching a corner, the Aston feels less ponderous, but ease it in and there’s greatly reduced body roll, better progression to how the remaining body roll is managed, enhanced grip, and the very welcome sensation that both ends of the car plan to travel in the same direction simultaneously. It’s also notable that the firmer set-up entails no real compromise – this remains a comfortable car to indulge a long-distance trip and still feels recognisably like a V8. It’s arguably more comfortable because it’s so much more composed. 


Most surprising is just how well the chassis copes with the extra power – it doesn’t squat excessively under full acceleration, and while it’s easier to adjust the car’s cornering attitude from the rear thanks to the abundant power and a super-responsive throttle, it’s not the over- engined hot-rod you might expect. It certainly put its power down well during the dry conditions of our photoshoot. 

The brakes represent as big an improvement as the engine, with a far more robust response from the pedal and what feels a four-fold increase in stopping power – you do have to beware locking up the front tyres more than in the stock car. There’s rather too much slack at the top of the pedal as well as too large a gap between brake and throttle for heel-and-toe down-changes, but both could be adjusted to suit a customer’s wishes. Or you could opt for the six-speed auto conversion also available from Aston Workshop, and I do wonder if a modern slusher might better suit the V8’s GT character and likely use. 

That’s the beauty of an upgrade like this, though – nothing is set in stone, and you can pick and choose from Aston Workshop’s menu based on your budget, the work your donor car will require, how you’d like it to look, and how you’ll use it. Yet a car like this – one that appears so original but drives so much better – is a great way to demonstrate the art of the possible. 


If you’re interested in the car or a restoration project please call +44 (0) 1207 268 932 or email sales@aston.co.uk


About Aston Workshop:
 
Aston Workshop is an independent Aston Martin specialist located on Red Row Estate, an idyllic 37 acre venue set in the North East countryside. Red Row is located in County Durham, only 2 miles away from Beamish Museum, one of the North’s major tourist attractions. We offer a wide variety of contemporary Aston Martins for sale in our showroom including special editions, low mileage examples and high performance models. Typically we have around 80 cars on site at any given time.  Additionally we have an unrivalled selection of valuable heritage models which are rare and often rebuilt to bespoke specifications with discrete modern enhancements. Typically stocking fully restored examples, older restorations, drivers, 100% electric zero emission EV conversions and even barn finds, our showroom is an unrivalled experience for the Aston Martin Enthusiast. We also build cars such as our DB4 GT Zagato recreations and our V8 Evolution 6.0.
 
Our sales showroom is supported by over 40 vastly experienced workshop staff working with a wide range of comprehensive in-house facilities including all aspects of Aston Martin diagnosis, repair, servicing and restoration to concours standards. Each member of our team works hard to ensure that we stay at the forefront of Aston engineering technology, Aston parts supply and full restorations including fixed price services where applicable.
 
Our experienced team are also pleased to help and advise if you are a collector or seeking to purchase a car specifically for investment purposes.
 

The benefits of buying and selling with us include:

  • Nationwide collection and delivery service on our own covered transporters
  • Cars which are prepared by technicians working exclusively on Aston Martins
  • Our own Aston Workshop Warranty
  • A comprehensive customer service which truly works for the duration of ownership
  • The confidence of dealing with a leading independent specialist established over 30 years

Enquire about finance

Enter your details below
Call us on +44 (0) 1207 233 525

Or why not try our Car Finder Service to locate your perfect match?

Click here to sign up.

“Aston Workshop Limited t/a The Car Barn_ is an appointed representative of ITC Compliance Limited which is authorised and regulated by the Financial Conduct Authority (their registration number is 313486). Permitted activities include acting as a credit broker not a lender.

We can introduce you to a limited number of finance providers. We do not charge fees for our Consumer Credit services. We typically receive a payment(s) or other benefits from finance providers should you decide to enter into an agreement with them, typically either a fixed fee or a fixed percentage of the amount you borrow. The payment we receive may vary between finance providers and product types. The payment received does not impact the finance rate offered.

All finance applications are subject to status, terms and conditions apply, UK residents only, 18's or over, Guarantees may be required. “